STC-220
เครื่องปอกสายไฟ ย้ำหางปลาแบบอัตโนมัติ
Strip crimper STC-220
SEMI CRIMPING MACHINE
- 1. Easy setting of processing conditions
- Since the strip unit is servo-controlled, the crimp position of wire and terminal, wire stripping blade adjustment, half strip length, strip length, pull back amount, tip cut length can be set by the touch panel.
- 2. Three functions can be switched
- ・Strip and crimp
- ・Strip only (can be semi-stripped)
- ・Crimp only
- 3. Applicator you have can be used
- JAM,AS40,AS42,AE30,UNION,OS12,RA12,AA13,OR487,OR387,etc Standard JAM type side feed end feed applicator can be used.
- 4. Possible to process a short length of cable
- Favorable for processing multi core cables such as cabtire cables.
- 5. Memory function
- 100 data can be memorized.
- 6. Option
Equipped with a sensor that detects the end of the wire. Strip crimp and strip can be processed without using a foot switch. We provide an attachment for mounting a genuine applicator of each manufacturer.
- JAM type made by Union
- OS12 type applicator installation example. The minimum processing length changes depending on the application and terminal. With a strip length of 1.6 mm for IL-S terminals, the shortest is 24 mm.
- Optional wire tip detection sensor
- Detection, start after delay (can be changed) → chucking → tip cutting → wire stripping → side movement (crimping position) → sinking → crimping → process of releasing chuck for discharging
| MODEL | STC-220 |
| Crimping capacity | 19,600N(Equivalent to 2 tons) LPC220S |
| Stroke length | 30 |
| Cable diameter | 0.01～0.85m㎡ (AWG#36～#18） （More than #30 is special order items） |
| Strip length | 1.0～8.0 |
| Tip cut length | 0～5.0 |
| Protruding tip length | 24.0（In the case of strip length 2 mm with applicator AS40） 16.5（In the case of strip length 1 mm with applicator AS42） |
| Machining tact | 1.5sec / 1pcs（It depends on the work content） |
| Power Source | AC100V (50/60HZ) single phase |
| Compressed air | 0.5MPa About 6 NL/per time（Dust collector for strip waste） * Use clean and dry air |
| External Dimension * | 550W × 600D × 560H |
| Weight | 140kg |
| Standard accessories | Reel stand, Foot switch, Power cord, One touch base Adapter |
| Opution | Light, Press stand, Tip detection sensor, Other company's applicator conversion kit |
*Not including any objection
*Protruding tip length changes depending on the type and size of the wire and the state of the applicator
*You need to change the combination of blades depending on the wire size
■Specifications are subject to change without notice
Control panel
All settings can be made on the touch panel
・ Setting of processing conditions Amount of cut by blade,peeling length, crimping position, etc.
・ Machining mode Foot switch, sensor activation switch (option)
・ Operation speed etc
