C550HX
เครื่องตัดปอกย้ำ 1 ด้าน ปั่นเกลียวและจุ่มตะกั่ว 1 ด้าน ใช้พิมพ์แบบ HX Series
FULL AUTOMATIC SINGLE END CRIMPING UNIT SINGLE END TWISTING and SOLDERING UNIT.
CASTUGNON
เครื่องตัด-ปอก-ย้ำสายไฟ KODERA สามารถรองรับการใช้งานที่มีฟังค์ชั่นแตกต่างกัน เช่น การปั่นเกลียว, จุ่มตะกั่ว, การปอกกลางสาย, การใส่ลูกยางกันน้ำ แยกไปตามประเภทเครื่องจักร
The new idea of the stand-alone soldering unit has newly developed.
- The soldering unit which is developed to pursue the neater finish is made independent from the HX main body to extremely reduce the oxidation by the vibration of the fluid level which is caused by the vibration during the crimping etc.Reducing of the preparation time has been enabled thanks to the shortening of heating up the solder time （lead-free solder to 350 deg C） compared to the old units.
The soldering bath which is made with carved titanium has been realized perfect lead-free.
- The perfect titanic soldering bath has been adopted in order to meet the high melting temperature of lead-free bath.
- Without the fear of eating away, always equable soldering is promised.
- And the preparation time (from turning on the power to the beginning of operation) is only 10 minutes thanks to the heat efficiency in the bath is the best.
Pursuing the processing of shorter length wire…
- By means of moving the setting position of the cutting blade in the cutter block,
- shorter lead processing has been realized. ( minimum 19mm)
- Handling the thin and short leads which are mainly used for the compact electronic devices has been enabled.
Everyone can operate simply and easily.
- The unit integrates a 5.7 inch full color LCD touch panel which is interactive data entry and has crimp force monitoring system and also the screen can be changed to English, Traditional Chinese,
- Simplified Chinese and Korean including Japanese with a single touch
■ Processing Lengths
| Value that can be set in longest Stripping length At cutting position "0" Front end | 0.1～34.5mm |
| Value that can be set in longest Stripping length At cutting position "0" Rear end | 0.1～5.5mm |
| Value that can be set in longest Stripping length At cutting position "1" Front end | 0.1～6.5mm |
| Value that can be set in longest Stripping length At cutting position "1" Rear end | 0.1～33.5mm |
| Minimum processing length | L ≧19mm |
| Maximum cutting length | 99,999mm（about100m） |
| Cutting tolerance | Within ±(0.1+0.0005xL)mm; L= Cutting length |
■ Crimper
| Crimping terminal | Open barrel chain terminals (side feed) Max,27mm. |
| Crimper capacity | 1.2ton |
| Control method | Digital control |
■ Measurement (body only), Weight
| Width×Depth×Height | 700mm×550mm×1,210mm |
| Weight | 190kg |
■ Supplies
| Electric power supply | single phase AC100V～AC240V 50/60Hz |
| Air supply | 18N ℓ/min 0.5MPa （Use clean , dry air.） |
| Power consumption During rest | During rest 330W（100V） |
| Power consumption At maximum | 850W（100V） |
■ Processing wire
| Applicable wire diameter | AWG#18～AWG#32（Depending on wire） |
| Applicable wire type | AV、 AVS、 AVSS、 CAVUS、 KV、 KIV、 UL、 Teflon,etc.. |
■ Crimper Side
| Width×Depth×Height | 27mm×23mm×79mm |
| Weight | 150g |
| ID Information | 1. Terminal information (model number, manufacturer), 2.Wire type, 3. Core diameter, 4. Crimp height, 5. Crimp force, 6. Appropriatestripping length, 7. Crimp position data, 8. Shot number (maximum 8 digits), 9. Trip shot number (maximum 7 digits), 10. Administrator (or Owner), 11.Control Lot No. |
| Width×Depth×Height | 39mm×30mm×57mm |
| Weight | 145g |
| Optical terminal location sensor integrated, ID tag, Wireless RF Approx.100kHz data send/receive device | |
| ID Information | 1. Terminal information (model number, manufacturer), 2. Shot number (maximum 8 digits), 3. Trip shot number (maximum 7 digits), 4. Administrator (or Owner), 5. Control Lot No. |
◆Specifications are subject to change without notice due to continual improvements.
